armor power bits
Moderators: Crafting Forum Moderators, Forum Moderator
-
- Apprentice Crafter
- Posts: 76
- Joined: Tue Nov 25, 2008 7:02 pm
- Location: Tallahassee, FL
- Contact:
armor power bits
hi all. i'm a returning a.s. i quit playing around the c.u. im back now and plan on resuming my career in "wookie" armor. my question is how do i make a "armor power bit" ive googled etc and cant find much info. the schematic says it takes 1 modifier bit and 1 power bit. so, are these parts player made, drops, or are they no longer in the game. thanks in advance atox
Re: armor power bits
Welcome back, its a whole new ballgame!!
You might want to check out the RE guide here:
http://www.swgcraft.co.uk/dev/guides.php?id=1
and Zimoon's guide (Reverse Engineering 101) in the RE forum.
Its simple as mud, sort of, if you have the right loot, and time, etc,.
Good luck
Zbig
You might want to check out the RE guide here:
http://www.swgcraft.co.uk/dev/guides.php?id=1
and Zimoon's guide (Reverse Engineering 101) in the RE forum.
Its simple as mud, sort of, if you have the right loot, and time, etc,.
Good luck
Zbig
Proji--------------------------Syotr
Wannabe Droid Engineer-- Wannabe Ranger
Wannabe Droid Engineer-- Wannabe Ranger
-
- Apprentice Crafter
- Posts: 76
- Joined: Tue Nov 25, 2008 7:02 pm
- Location: Tallahassee, FL
- Contact:
Re: armor power bits
ty for the info. a bit mind boggling but i get the general idea. time to poke around my storage aka junk piles and see what i can come up with thanks again atox 

Re: armor power bits
for armor, there is a schematic for AS. It's in there but between a lot of stuff. You need a power bit and a modifier bit. Instead of putting it in a R.E. tool, you use it in a schematic to make the armor bit. Remember the resulting bit will be at 40% of the original conversion, so instead of a +35 con armor bit, it would be more like +14. But remember that if your chestpiece also has a socket you can add on another SEA, so +14 for the armor bit AND +35 con for the SEA, just as an easy example.
Who is online
Users browsing this forum: No registered users and 1 guest